Tate Andale - 100111016H - 10 Inch Model AL/AH Duplex Strainer

DESIGN/OPERATING CONDITIONS:
- Design Pressure: 300 psi
- Design Temperature: 150 deg F

STRAINER CONSTRUCTION:
- Pressure Bearing Castings: Ductile Iron
- Non- Pressure Castings: Cast Iron
- Valve Screw: Steel (Non-Wetted Component
- Valve Shaft: Bronze/Brass
- Gaskets: Compressed Non-Asbestos
- Packing: Graphite/PTFE
- Disc Seats: Rubber
- NPT Plugs: Brass
- Internal/External Coating: Fusion Bonded Epoxy Coating
- Flanges: 10" Drilled and faced in accordance with ASME B16.42, Class 300
- Inlet Flange to Outlet Flange Dimension to be 39 3/8” or less. If less provide a spool piece to make up distance.
- Centerline of flange to base 18 3/8” or less
- Assembly: Left Hand
- Differential Pressure Gauge Assy. - Stainless Steel tubing, brass/stainless steel fittings
- Stainless Steel Equalizing line Assy. Stainless Steel Valves
- Chain Drive Assembly
- Vent Valves: NPT threads into the access covers
- Hardware: Stainless Steel

Additional Notes:
- Hydrostatic test Pressure: 390 Psig, held for 120 minutes.
- Seat Test at 300 Psig
- Units do not carry ASME Section VIII, Division 1 Approval (Cast Products are 100% Compliant to the Buy America Act)